新闻动态
您当前的位置:ARIS Stellantriebe GmbH > 新闻动态 >

新ARIS直线运动驱动器获得“防爆”设计 LINEARIS goes ATEX

发布时间:2016-04-15   来源:ARIS Stellantriebe
  ARIS Stellantriebe GmbH公司提出的贸易在其新的风门执行器线形显示DIAM和阀门世界在2014年最新的内部开发被广泛接受和ARIS收到了若干建议,以提供在设计,适用于使用这些线性运动驱动器1区的爆炸性环境。

ARIS据说是专门为工业驱动技术拥有超过40年的经验和永久的市场定位。因此,ARIS开发团队已经修改了现有的ATEX驱动器,并在最短的时间实现的线形前。

智能线和经典线路执行器作为驱动器磁头。这些都是,前面已经回转和部分回转执行器,安装在单独的隔爆外壳,从而实现所有要求在1区使用。

按照ATEX风险评估 - 指令94/9 / EC表明,线形提升单元可以在1区这里危险区域稍作修改使用,新的线形提升单元从他们的优势,对已售出到2014年风门执行器播放,由于单位没有牢固地连接到驱动器磁头,而是可以进行各种驱动器磁头相结合。

当然,在防爆型的线形是免维护的,与早期型号。由于可能使用智能线路驱动器磁头时,ARIS客户获得全电子执行器的所有优点。这些措施包括确切的操作时间和转矩控制,通过连续驱动监控的安全功能,设置方便,多电压电源(90-265 VAC),软启动/停止等,如果单个应用程序经典的驱动技术与同步电机并且足够,可以使用开关凸轮经典线的平行的驱动磁头。

新ARIS直线运动驱动器获得“防爆”设计 LINEARIS goes ATEX
 

LINEARIS goes ATEX – New ARIS Linear Motion Drive gets “Ex” Design

ARIS Stellantriebe GmbH has presented its new damper actuator LINEARIS during the trade shows DIAM and Valve World in 2014. This latest in-house development was well accepted and ARIS received several suggestions to offer these linear motion drives in a design which is suitable for use in explosive atmospheres of zone 1.

ARIS is said to be specialist for industrial drive technology with experience of over 40 years and permanent market orientation. Therefore the ARIS developer team has modified the existing ATEX drive and implemented the LINEARIS Ex in the shortest time.

Actuators of the Intelligent Line and the Classic Line are used as drive heads. These are, as already the rotary and part-turn actuators, installed in a separate flameproof enclosure, thereby fulfilling all the requirements use in zone 1.

The risk assessment in accordance with ATEX - Directive 94/9/EC showed that the LINEARIS lift unit can be used with minor modifications in hazardous areas of zone 1. Here, the new LINEARIS lift unit plays from their advantage over damper actuators sold until 2014, since the unit is not firmly connected to the drive head, but can be combined with various drive heads.

Of course, the LINEARIS in Ex version is maintenance-free, in contrast to earlier models. Due to the possible use of the Intelligent Line drive heads, the ARIS customers get in all the benefits of a fully electronic actuator. These include exact operating time and torque control, security features by continuous drive monitoring, easy set up, multi-voltage power supply (90-265 VAC), soft start/stop, etc. If for individual applications the classic drive technology with synchronous motor and switch cam is sufficient, parallel drive heads of the Classic Line can be used.
 
ARIS Stellantriebe GmbH